BA-Ⅱ Controllers

Slave Unit CA20-S10, CA20-S40

Overview

CA20-S10

Used as an auxiliary unit when controlling the master unit or high-performance master unit. A driver unit for one axis control is built in this unit.

Inquiry phone:
・TOKYO 03-3509-0270
・CHUBU 052-702-7660
・KANSAI 06-6341-637

Specifications

Type of controller CA20-S10 CA20-S40
(Note 1)
No. of controlled axis 1-axis control by connecting with a master unit.
Motor capacity (W) 50 100 200 400
Drive system AC servo motor
Alarm display Error indicator lamp ON (on front panel) and
teach pendant display (connected with a master unit)
External input 8 points
External output 8 points
Power supply AC100V ∼ 120V, AC200V ∼ 240V, ±10% 50/60Hz
Changeover of 100V or 200V circuit by short- bar on front terminal block.
AC200V ∼ 230V, ±10% 50/60Hz
Power capacity
(per 1-axis) (VA)
100 160 450 700
Noise conditions 1500Vp-p, pulse width 1μs (by noise simulator)
Ambient conditions Room temperature 0 - 40°C, humidity 30% - 90% RH, non-condensing and no corrosive gas present.
Dimensions 55 (W) × 160 (H) × 134 (D)
(excluding metal fixtures)
85 (W) × 160 (H) × 134 (D)
(excluding metal fixtures)
Mass (kg) 0.91 1.34

Note 1: When using CA20-M40, be sure to use regenerative discharge unit ABSU-4000.

Inquiry phone:
・TOKYO 03-3509-0270
・CHUBU 052-702-7660
・KANSAI 06-6341-637

PAGE TOP