Die Casting Machine

J series that fills three performances requested from high cycle to say nothing of J high performance and convenience and machine. The preset feature will be enhanced and we answer needs that are three models of high-grade machine JMH that demonstrates standard machine JMS and highest shooting speed 10 - 13m/s at which standard machine JSC and the servo valve equipped with CAST EYE are installed more various.

Photo: DC135J-T

Specification item	Unit	DC135J-SX	DC135J-T
Die locking force	kN(ton)	1350(138)	1350(138)
Injection speed	m/sec	0.05-7.0	0.05-6.0
Tie-bar spacing (H*W)	mm	460*460	460*460
Die height	mm	500-250	500-250
Die stroke	mm	350	350
TOSCAST		No	Standerd
CASTEYE		Standerd	No
Servo Control Injection		No	Option

Specification item	Unit	DC250J-SX	DC250J-MS	DC250J-MH
Die locking force	kN(ton)	2500(255)	2500(255)	2500(255)
Injection speed	m/sec	0.1-7.0	0.1-8.0	0.05-13.0
Tie-bar spacing (H*W)	mm	580*580	580*580	580*580
Die height	mm	600-300	600-300	600-300
Die stroke	mm	360	360	360
TOSCAST		No	Standerd	Standerd
Servo Control Injection		No	Standerd	Standerd
CAST EYE		Standerd	No	No

Photo: DC350J-MS

Specification item	Unit	DC350J-SX	DC350J-MS	DC350J-MH
Die locking force	kN(ton)	3500(357)	3500(357)	3500(357)
Injection speed	m/sec	0.1-7.0	0.1-8.0	0.05-11.0
Tie-bar spacing (H*W)	mm	650*650	650*650	650*650
Die height	mm	700-300	700-300	700-300
Die stroke	mm	420	420	420
TOSCAST		No	Standerd	Standerd
Servo Control Injection		No	Standerd	Standerd
CAST EYE		Standerd	No	No

Specification item	Unit	DC500J-SX	DC500CJ-MS	DC500J-MH
Die locking force	kN(ton)	5000(510)	5000(510)	500(510)
Injection speed	m/sec	0.1-7.0	0.1-8.0	0.1-12.0
Tie-bar spacing (H*W)	mm	750*750	750*750	750*750
Die height	mm	850-350	850-350	850-350
Die stroke	mm	550	550	550
TOSCAST		No	Standerd	Standerd
Servo Control Injection		No	Standerd	Standerd
CAST EYE		Standerd	No	No

Specification item	Unit	DC650J-SX	DC650J-MS	DC650J-MH
Die locking force	kN(ton)	6500(663)	6500(663)	6500(663)
Injection speed	m/sec	0.1-7.0	0.1-7.0	0.05-10.5
Tie-bar spacing (H*W)	mm	850*850	850*850	850*850
Die height	mm	900-350	900-350	900-350
Die stroke	mm	660	660	660
TOSCAST		No	Standerd	Standerd
Servo Control Injection		No	Standerd	Standerd
CAST EYE		Standerd	No	No

Photo: DC800J-MS

Specification item	Unit	DC800J-SX	DC800J-MS	DC800J-MH
Die locking force	kN(ton)	8000(816)	8000(816)	8000(816)
Injection speed	m/sec	0.1-7.0	0.1-6.5	0.05-10.0
Tie-bar spacing (H*W)	mm	930*930	930*930	930*930
Die height	mm	950-400	950-400	950-400
Die stroke	mm	760	760	760
TOSCAST		No	Standerd	Standerd
Servo Control Injection		No	Standerd	Standerd
CAST EYE		Standerd	No	No


	Privacy Policy	Copyright(C) 2011 TOSHIBA MACHINE CO.,LTD. All Rights Reserved.

Caution: Please note that due to the use of javaScript, this page may not be correctly displayed if the browser does not have the required functions or if the settings are not valid.