| The multistage injection die casting machines have adopted newly developed
high precision hydraulic servo valves and embodied various injection patterns
form super-low-speed range (0.05m/sec) to super-high-speed range
(10.0m/sec). From intricate configuration parts to magnesium
material casting, not to mention thin-walled parts, they are intended to
pursue new casting possibilities. They line up in each series of die locking
force from 500kN(153ton) to 39200kN(4000ton). |
DC250¥350J-MT
DC1250-4000CS
| Specification item |
Unit |
DEC150-MT |
DC250J-MT |
DC350J-MT |
| Die locking force |
kN(ton) |
1500(153) |
2500(255) |
3500(357) |
| Injection speed |
m/sec |
0.05-10.0 |
0.05-10.0 |
0.05-10.0 |
| Tie-bar spacing (H*W) |
mm |
510*510 |
580*580 |
650*650 |
| Die height |
mm |
500-250 |
600-300 |
700-300 |
| Die stroke |
mm |
360 |
360 |
420 |
| TOSCAST |
|
Yes |
Yes |
Yes |
| Specification item |
Unit |
DC500CL-HT |
DC650CL-HT |
DC800CL-HT |
| Die locking force |
kN(ton) |
4900(500) |
6370(650) |
7840(800) |
| Injection speed |
m/sec |
0.05-10.0 |
0.05-10.0 |
0.05-10.0 |
| Tie-bar spacing (H*W) |
mm |
750*750 |
850*850 |
930*930 |
| Die height |
mm |
850-350 |
900-350 |
950-400 |
| Die stroke |
mm |
550 |
750 |
950 |
| TOSCAST |
|
Yes |
Yes |
Yes |
| Specification item |
Unit |
DC1000C |
DC1250CS |
DC1650CS2 |
| Die locking force |
kN(ton) |
9800(1000) |
12250(1250) |
16170(1650) |
| Injection speed |
m/sec |
0.1-10.0 |
0.1-9.0 |
0.1-10.0 |
| Tie-bar spacing (H*W) |
mm |
1020*1020 |
1250*1120 |
1500*1300 |
| Die height |
mm |
1200-600 |
1500-600 |
1700-800 |
| Die stroke |
mm |
830 |
900 |
1050 |
| TOSCAST |
|
Yes |
Yes |
Yes |
| Specification item |
Unit |
DC2250CS2 |
DC2500CS2 |
DC3500CS |
| Die locking force |
kN(ton) |
22050(2250) |
24500(2500) |
34300(3500) |
| Injection speed |
m/sec |
0.1-9.0 |
0.1-9.0 |
0.1-9.0 |
| Tie-bar spacing (H*W) |
mm |
1500*1550 |
1700*1600 |
1750*1550 |
| Die height |
mm |
1700-900 |
1700-900 |
2000-1000 |
| Die stroke |
mm |
1200 |
1350 |
1450 |
| TOSCAST |
|
Yes |
Yes |
Yes |
|
