Vented-Type Injection Molding Machine Series

Vented-Type Injection Molding Machine Series

Energy efficient injection molding machines equipped with a vent system for the production of quality molded parts due to the elimination molding operation related trouble.
[NOTE]
The maximum shot volume is slightly less than that of standard machines. (see specifications for detail.)

IS-G/GN-V Series Specifications

ITEM	unit	IS80G-V	IS100GN-V	IS130GN-V	IS170GN-V	IS220GN-V
Injection Unit Code		i2	i3	i5	i7	i10
Screw Diameter	mm	32	36	40	45	50
Injection Weight (ABS)	g	105	150	205	295	405
Injection Pressure	MPa	199	196	197	196	201
Plasticizing Capacity (ABS)	kg/h	20	30	48	58	68
Clamping Force	kN	760	1010	1260	1640	2150
Distance Between Tie Rods	mm	375×375	460×410	510×460	560×510	610×560
Clamp Stroke	mm	460	550	630	720	800
Open Daylight (Max)	mm	630	750	850	950	1060
Motor for Pump	kW	15	18.5	18.5	22	30
Machine Dimensions (LxWxH)	m	4.3×1.4×1.7	5.1×1.2×1.7	5.3×1.2×1.7	5.9×1.2×1.8	6.4×1.3×1.8

(Note)1MPa=10.2kgf/cm²,1kN=102kgf The figures is this table for 60Hz.



	Privacy Policy	Copyright (C) 1997-2005 TOSHIBA MACHINE CO.,LTD. All Rights Reserved.

Caution: Please note that due to the use of javaScript, this page may not be correctly displayed if the browser does not have the required functions or if the settings are not valid.