Product Information

DC-J Series

J series that fills three performances requested from high cycle to say nothing of J high performance and convenience and machine. The preset feature will be enhanced and we answer needs that are three models of high-grade machine JMH that demonstrates standard machine JMS and highest shooting speed 10 - 13m/s at which standard machine JSC and the servo valve equipped with CAST EYE are installed more various.

DC135J -T

DC135J -T

Specification itemUnitDC135J-SCDC135J-T
Die locking forcekN (ton)1350 (138)1350 (138)
Injection speedm/sec0.05 - 7.00.05 - 6.0
Tie-bar spacing (H*W)mm460 × 460460 × 460
Die heightmm500 - 250500 - 250
Die strokemm350350
TOSCASTNoStandard
Servo Control InjectionNoOption
CAST EYEStandardNo
Specification itemUnitDC250J-SCDC250J-MSDC250J-MH
Die locking forcekN (ton)2500 (255)2500 (255)2500 (255)
Injection speedm/sec0.1 - 7.00.05 - 8.00.05 - 13.0
Tie-bar spacing (H*W)mm580 × 580580 × 580580 × 580
Die heightmm600 - 300600 - 300600 - 300
Die strokemm360360360
TOSCASTNoStandardStandard
Servo Control InjectionNoStandardStandard
CAST EYEStandardNoNo
DC350J-MS

DC350J-MS

Specification itemUnitDC350J-SXDC350J-MSDC350J-MH
Die locking forcekN (ton)3500 (357)3500 (357)3500 (357)
Injection speedm/sec0.1-7.00.1-8.00.05-11.0
Tie-bar spacing (H*W)mm650*650650*650650*650
Die heightmm700-300700-300700-300
Die strokemm420420420
TOSCASTNoStandardStandard
Servo Control InjectionNoStandardStandard
CAST EYEStandardNoNo
Specification itemUnitDC500J-SXDC500CJ-MSDC500J-MH
Die locking forcekN (ton)5000 (510)5000 (510)500 (510)
Injection speedm/sec0.1-7.00.1-8.00.1-12.0
Tie-bar spacing (H*W)mm750*750750*750750*750
Die heightmm850-350850-350850-350
Die strokemm550550550
TOSCASTNoStandardStandard
Servo Control InjectionNoStandardStandard
CAST EYEStandardNoNo
Specification itemUnitDC650J-SXDC650J-MSDC650J-MH
Die locking forcekN (ton)6500 (663)6500 (663)6500 (663)
Injection speedm/sec0.1-7.00.1-7.00.05-10.5
Tie-bar spacing (H*W)mm850*850850*850850*850
Die heightmm900-350900-350900-350
Die strokemm660660660
TOSCASTNoStandardStandard
Servo Control InjectionNoStandardStandard
CAST EYEStandardNoNo
DC800J-MS

Photo: DC800J-MS

Specification itemUnitDC800J-SXDC800J-MSDC800J-MH
Die locking forcekN (ton)8000 (816)8000 (816)8000 (816)
Injection speedm/sec0.1-7.00.1-6.50.05-10.0
Tie-bar spacing (H*W)mm930*930930*930930*930
Die heightmm950-400950-400950-400
Die strokemm760760760
TOSCASTNoStandardStandard
Servo Control InjectionNoStandardStandard
CAST EYEStandardNoNo